Clamping method for machining workpiece on CNC lathe:

machining workpiece

1. All the clamping of the workpiece processed by the CNC lathe is horizontal and vertical.

2. CNC lathe machining vise clamping: the clamping height should not be less than 10 mm, and the clamping height must be the same as the machining height when processing workpiece. The processing height should be about 5 mm higher than the vise three-dimensional, the purpose is to ensure the firmness, while not hurting the vise. This type of clamping is a common clamping, and the clamping height is also related to the size of the workpiece. The larger the workpiece, the corresponding increase in the clamping height.

3. CNC lathe processing splint clamping: the splint is coded on the task table, and the workpiece is locked on the splint with screws. This type of clamping is suitable for workpieces that cannot be clamped in height and have large processing forces, and ordinary medium and large workpieces. , The effect is better.

4. CNC lathe processing code iron clamping: when the workpiece is relatively large, the clamping height is not enough, and the wire is not allowed to be locked at the bottom, the clamping iron is required. This kind of clamping needs to be clamped twice. The four corners are first coded, the other parts are processed, and then the four sides are coded to process the four corners. During the second clamping, the workpiece should not be loosened, first yard and then loosen. It is also possible to code both sides first, and then process the other two sides.

5. Clamping of CNC lathe processing tools: the diameter should be more than 10mm, and the clamping length should not be less than 30mm; if the diameter is less than 10mm, the clamping length should not be less than 20mm. The clamping of the tool must be strong, and it is forbidden to hit the tool and indirectly pull out the workpiece.